AWD GANTRY 2018
The machine is especially constructed for highly productive cutting of large work pieces by automatic band saw machine. It has a robust construction recommended for forging and is designed for use difficult to machine materials, such as Inconel, Hastelloy, titanium and other materials these kinds.
There is a fixed control platform located in the Gantry-frames. The accessibility of all guiding wheels is ensured. The cutting line indicator is by means of two lasers parallel to the cutting line and the rinsing hose. The construction of the machine is advisable for the use of Bi-metal and hard-metal band saw blades.
The static levelling of the saw frames weight is via two hydraulic cylinders. In the case of a loss of pressure, protection is by means of the hydraulic valves.
The band saw blade is guide by four impeller wheels. The fixed unit of guiding is with the HM-plates on the right and left from the working area with the movable unit and two automatically rotary guiding (0° and 90°) located on the moving unit.
TECHNICAL DATA – WORK PIECE
fireproof and tough at low temperatures
800 to 1.200 MPa
Diameter of work piece:
Length of work piece:
Maximum weight work piece
TECHNICal data – machine
Length of the table
10 – 90
Maximum track of the band saw travel:
X – axis
Z – axis
Equipment for band saw blade turnover
Dimension of the band saw blade
18.500 x 80 x 1,6 mm
Dimension of the travel of the guiding arm
600 – 2.200 mm
Working height of the work piece through the hall
Band saw motor
Pump for coolant
2 x 15 kW